Home > Windows 7 > Windows 7 Setup Stop In Disk.sys On UEFI Mode

Windows 7 Setup Stop In Disk.sys On UEFI Mode

I have absolutely pulled out all things out. Looks like it only supports UEFI since I couldn’t find any other setting in BIOS utility. What is the difference between IMO and IMHO and IHOP? Problem solved. http://docsintime.com/windows-7/windows-7-uefi.html

I have the same motherboard and powersupply as you and after coming across your thread and noticing the similarity i finally ripped out my PSU from my old PC and threw If you have a spare CDROM, that would be a plus, try that. If it's not the Windows 7 DVD I'll tell the repair folks to try a different PSU. Disabling just about everything else in bios 4. http://www.sevenforums.com/installation-setup/340193-windows-7-setup-stop-disk-sys-uefi-mode-but-bios-mode-did.html

ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.2/ Connection to 0.0.0.2 failed. It finishes EVERYTHING and restarts, but then it hangs at "completing installation" after the restart. But it can reboot, so it´s not frozen.Maybe it´s just not true that Windows 7 64 bit is compliant with the latest UEFI mode boot. sigh!

  • It copied the install files to the hard drive.
  • It apparently had nothing to do with disk.sys.   Although Microsoft lists the Radeon HD 4650 as being compatible with Windows 7, that is only partially true.
  • Post back what you find out.
  • It came out clean.
  • Message 1 of 8 (22,486 Views) Reply 0 Kudos tom85 Practitioner Posts: 260 Re: Can't Install Windows 7.
  • If it passes all, then your hard drive is healthy. #14 cheez, Oct 28, 2011 Last edited: Oct 28, 2011 docp Member Joined: Jul 4, 2007 Messages: 190 Likes Received:
  • If you feel lazy doing this which I understand, remove the other two hard drives and just leave one in there to install windows.
  • I disabled floppy disk drive,made sata controller over ide only.
  • Its brand new.

Windows 7 install hangs on starting windows solved Issue Installing Windows - Screen Hangs On Starting Windows - Desperately Seeking Help Windows 7 Hangs at Starting Windows (After clean install) Windows I found that there was an issue with the driver not being completely compatible with the AGP version of the card and that there was a "Hot Fix" driver available. Then powered off computer and reinserted RAM. Did you install the latest audio and gpu drivers from the manufacturer, and not from the Asus install disk?

Saturday, December 05, 2009 7:17 PM Reply | Quote 0 Sign in to vote My problem is solved. I could get W7 to load but only in safe mode, however the same problem always occurred when trying a ‘normal’ boot. I think I wasn't clear - this is a brand new home built computer. https://social.technet.microsoft.com/Forums/windowsserver/en-US/f6dd9572-395b-4e69-b12c-17324bd6a434/windows-7-freezes-on-disksys?forum=w7itprogeneral CPU temp from BIOS is 27-28.

smuck schrieb: Windows 7 64 bit setup loads drivers before it comes to the screen with load driver option. Best RegardsDale Marked as answer by Dale QiaoModerator Wednesday, October 14, 2009 2:43 AM Thursday, October 08, 2009 7:05 AM Reply | Quote Moderator 0 Sign in to vote I have Ps2 mouse and LG monitor over dvi. While waiting for a response, I guess I'll create partitions and try again.

Importing Illustrator file to Photoshop: cut lines between shapes are visible Has the Doctor ever knowingly interacted with his current incarnation Should I pay more towards my mortgage? 1 Fake Coin https://community.acer.com/t5/2014-Archives/Can-t-Install-Windows-7-Installation-hangs-on-disk-sys/td-p/28415 With IDE it doesn´t really freeze, the circling windows go together at logo screen, and then it keeps working a while until it stops. Memory passed memtest.I mentioned truendor's suggestion about the power supply and the tech will try a different power supply today. Not even case fan is attached to motherboard.

Only UEFI and Legacy. this contact form But as soon as I install the Sigimatel Audio drivers for it and reboot it just black screens before it loads windows.I then have to reboot in safe mode and disable The freeze happens during attempted installation of Windows 7 from disc. Since only Win8 supports a "clean" UEFI mode OS installation (CSM Disabled), you may have to change some BIOS settings within the "BOOT" section.

Hard Drive2. Please try the request again. Also, just an FYI: Never switch from AHCI to IDE mode (or vice-versa), or Windows won't boot up. have a peek here If in BIOS the SATA controller is set to IDE instead of AHCI it makes a difference to the freeze like the setup is working some more before freezing.Computer TypeACPI x64-based

Eureka! Started computer and worked first time. Hvad med det fysiske og følelsesmæssige suger niveau? 10 ideer til utraditionel par til påske Calla Lily og original idé til en prom Populære Artikler Ingefær limonade, agurk og mynte for

I booted into XP and started an install from there.

When I ran the Windows 7 install inside of xp, the partitioner only showed the formatted partitions, and not the unpartitioned spaces. I tried just about everything under the sun in BIOS settings, startup options, PS/2 keyboard w/ no mouse, etc. Ubuntu livedisk also fails to install.or run.after selecting it as boot,it shows all options.I can scroll till run memtest and then it blanks out. Second froze as 4 colored bubbles appeared.3.

The 4 colored orbs fly into place and pulse for about 5 seconds, then freeze and no longer pulse. Maybe a Firmware update will help.If you don't succeed this way, I recommend to install Win 8 instead of Win7. PS 2 mouse and USB keyboard. http://docsintime.com/windows-7/windows-7-installs-completes-the-setup-very-well-but-doesn-t-boot.html Tillad Hjemmegruppe til at kommunikere gennem Windows Firewall Disse er Googles Public DNS s Er det, hvad du har setup i din router indstilling som standard du skal bruge din internetudbyders

truendorNov 23, 2009, 10:54 AM Still couldn't get it to boot past Starting Windows after putting the corsair psu back in after windows 7 was fully installed and operational. I retried after each component was replaced:1. First try froze on second load screen2. Windows 7 x64 Starts in Safe Mode but Hangs in Normal.

Guess what I am writing this comment from the same HDD which was giving trouble with a fresh install of 7. Disabling just about everything else in bios 4. share|improve this answer answered Mar 3 '12 at 22:51 Pierre Bourdon 1064 Please provide it for completeness, and you will be able to accept your own answer within 24 Do you have WinXp disc?

Swapped all sata ports on all available 6 ports. This is a mandatory field. Thursday, January 29, 2015 8:39 PM Reply | Quote Microsoft is conducting an online survey to understand your opinion of the Technet Web site. so far windows 7 seemed to be mroe favorable as it got to the complete installation after successful reboot, but nothign after and repairing doesn't seem to work.

After that option was disabled I was able to have my card reader installed without hanging the system.As others have suggested, unplug anything not required to boot up and if you Were you unable to finish installing windows 7? So did it twice also without the enhanced option. There was no added hardware or software to the system (completely random) 4.

Message 3 of 8 (22,481 Views) Reply 0 Kudos Daniel_Hatcher New User Posts: 1 Re: Can't Install Windows 7. Using a PS2 keyboard/mouse 2. I've tried taking out components, changing ram, unplugging all unnecessary devices. General error.

Latest: 2is, Jan 11, 2017 at 11:19 AM Video Cards and Graphics Will Trump Cancel His Press Conference On Wednesday? Read our Knowledge Base article for helpful information and links, then introduce yourself in our Welcome Forum.