Home > Windows 7 > BSOD While Trying To Install Windows 7 64-bit

BSOD While Trying To Install Windows 7 64-bit


I was told it was the RAM, but I replaced that and still have the same issues. I haven't changed anything at all. Dec 19, 2014 #3 Tmagic650 TS Ambassador Posts: 17,244 +234 Can you temporarily install a standard Hard Drive set as AHCI and try the Widows install and Windows Updates again? All my experience with BSOD is due to a Hardware communication, interrupting between the MB and Windows. 1) Make sure you have no un-happy hardware drivers in your "Device Manager"... http://docsintime.com/windows-7/bsod-on-new-windows-7-install.html

I reset bios and selected that. It didn't seem to help though. I'm honestly at a loss at this point. No errors found. - Tried with SATA configured as IDE in the BIOS, no effect. - Swapped out PSU and memory from a working PC.

Blue Screen During Windows 10 Installation

I'm honestly at a loss at this point. Fresh install on fresh PC fails with BSOD0Windows XP 64bit Sp2 Installation on Compaq CQ620Cannot install Windows 7 on new PC (BSOD during installation)1BSOD on Windows 7 install - Linux works I suspected the wireless mouse, so I reinstalled pulling the transceiver on boot to the initial extraction of Server 2008 files. BrandonTheGreatMay 3, 2012, 1:47 AM RetiredChief said: Instead of manually setting the ram parameters, Your bios should allow you to select XMP and the select profile 1.Haven't checked, but for Your

All 8 ports on this motherboard are SATA3 and all were set as AHCI by default. Dec 21, 2014 #8 JeremyNH TS Rookie Topic Starter I gotta say, that's the best idea I've heard all month. Design by @jzy Login _ Social Sharing Find TechSpot on... Blue Screen Error While Installing Windows 7 I don't remember the error codes off-hand, but I can snag a picture if that would help.Build specs:CPU: AMD FX-8350Motherboard: ASUS M5A99FX Pro 2.0HD: Western Digital Black 1TBGPU: Radeon HD 7950RAM:

I have a AMD FX 8350WD 1TB HDGeforce GTX 46016gb patriot viper extremeMobo is gigabyte 970A-DS3PI have the very same issue that I have been dealing with for weeks and I crashes again) or comes to rest at the "Windows installation cannot proceed" dialog box. I'm getting the following error message: STOP: 0x0000007EACPI.SYSHere are my system specs:Core i5-3570KAntec 550W 80+4x 4gb G.Skill Ripjaw DDR3 1600ASRock Z77 Extreme4 LGA 1155Radeon HD 7850 PCI-E 3.0WD Caviar 1TB 7200rpmI We had a 5yo Dell Precision stuck in the installation loop that you have described.

Ask a question and give support. Blue Screen When Installing Windows 7 From Usb more hot questions question feed about us tour help blog chat data legal privacy policy work here advertising info mobile contact us feedback Technology Life / Arts Culture / Recreation Science I'm building a system for a friend... $650 total Dec 22, 2014 #10 JeremyNH TS Rookie Topic Starter Update: Replaced the Gigabyte motherboard with an Asus A88X-Pro FM2+ ($128 when I just want to get this build up and running.

  1. The Windows 7 installation completed successfully, including all updates.
  2. http://www.w7forums.com/threads/official-windows-7-sp1-...
  3. After loading all of the drivers windows crashes on the screen where the windows logo is displayed, before and kind of screens or prompts are displayed.
  4. BSOD are tuff problems too solve...
  5. I am able to boot Hirens 15.2 from CD or USB on this build, so I can run tests.
  6. Unfortunately, removing all USB devices and starting over did NOT solve the problem for me.
  7. Setup succeeded.

Blue Screen While Installing Windows 7

Dec 26, 2014 #11 bazz2004 TS Evangelist Posts: 1,266 +205 Could it be Windows 7 with the latest kit? RothinzilOct 10, 2013, 12:12 AM This is my first from-scratch build, and I've never messed with any settings like that on my computers. Blue Screen During Windows 10 Installation TechSpot is a registered trademark. Hidclass.sys Bsod Windows 7 Install Does anyone think the CPU (A8-7600) is to blame?

You can download a 3 months free trial of Windows 8.1 and Windows 10 development ISOs were recently made available. navigate here Thanks for detail information.Gaurav AroraMonday, 09 June 2014 08:15:01 UTCHmm!! EdsadietMay 12, 2014, 11:11 AM I had the same problem and did every suggested answer possible. but generally most of them are to intrusive for my liking so i stick with windows own.for a good all i 1 payed solution i recommend kaspersky. Windows 7 Install Blue Screen After Restart

I asked my buddy if he had a mouse attached and he did. I have subjected it to prime95 a few times, but it never finds errors. (FYI I can always boot from the Hiren's CD and run any tests I want for as But for now, what's next? Check This Out Dec 19, 2014 #4 JeremyNH TS Rookie Topic Starter I disconnected the SSD and attached an ordinary Seagate 500GB 5400rpm drive.

I'm honestly at a loss at this point. Blue Screen While Installing Windows Xp I haven't changed anything at all. HEXiTJul 30, 2013, 1:06 PM if you get kaspersky its unlikely you will need malwarebytes as a payed version.

Join thousands of tech enthusiasts and participate.

I don't believe my ram is the issue, I have run memtest86 on it and it tested all 16gigs with no errors. I was just at the end of my rope and happened to stumble across this. Assuming that the installation was corrupted by this, I tried re-installing Windows 7, and was able to reformat the drive but it crashed during the "completing installation" step. Blue Screen After Installing Windows 7 share|improve this answer answered Jan 14 '11 at 13:28 Iszi 6,1502975131 add a comment| up vote 0 down vote Go into your BIOS and see if there is anything about "SATA

TechSpot Account Sign up for free, it takes 30 seconds. solved When installing Windows 8.1 x64 i get a BSOD stating IRQL_NOT_LESS_OR_EQUAL BSOD before and after format windows 7 ultimate x64. If I do get one with data I'll post it. http://docsintime.com/windows-7/how-do-i-repair-or-do-a-clean-install-with-no-windows-7-install-disc.html Get the answer geekapprovedMay 3, 2012, 12:14 AM You should be running the speed, timings and voltage at what it says on the sticker on the dimm, not something else.If your

I'm getting the following error message: STOP: 0x0000007E ACPI.SYS Here are my system specs: Core i5-3570K Antec 550W 80+ 4x 4gb G.Skill Ripjaw DDR3 1600 ASRock Z77 Extreme4 LGA 1155 As a second test I disconnected the Seagate and left the build without any hard drive installed, 4 bluescreens after 4 attempts. Windows 7 pro x64 bit Hang w/o BSOD; Error code 80092004. Check with your hardware vendor for any BIOS updates.

I just want to get this build up and running. Building a bridge from one side Darth Vader says “There’ll be no one to stop us this time” - what happened last time? When I install second OS I didn't reformat the entire hard disk. Then, of course, if you're not looking at it you'll just reboot and drop back into setup and get the "the computer restarted unexpectedly or encountered an unexpected error." At this

RAM, Display Card, Power Supply, and the Mother Board. No Yellow or Red icon indicators 2) Clean all card/stick edges with rubbing alcohol... Installed new ram=Endless Blue Screen of Death on Windows 8.1 Blue Screen of Death after fresh windows 7 install solved Blue screen of death, reformatted, can't finish install/boot to windows, computer Does windows 7 support the new Z77 chipset, you may need to download the HDD river from Intel and select "F^ to install the corect driver.

All programs purchased by the client were installed and are working. RothinzilOct 10, 2013, 4:22 AM Not really sure if it's related, but I'm curious. Also, you can contact manufacturer to check the hardware issue. Terms of Use Privacy Policy Licensing Advertise International Editions: US / UK India

I was told it was the RAM, but I replaced that and still have the same issues. Attached working graphics card, no effect. - Tried a spare Windows 7 installation CD, then a Windows 7 installation USB, no effect. - Stripped motherboard of everything non-essential, no effect. - The blue screens you posted are showing a possible hardware fault, but it may be false Dec 20, 2014 #6 JeremyNH TS Rookie Topic Starter I would do this, but comodo do a great free 1 as do a couple of others.