Home > General > Boot.ini


However, the attributes must first be changed, Also, care must be taken to preserve the correct extension. This file is used by Microsoft Windows as a method of displaying a menu of operating systems currently on the computer and allowing the user to select what operating system to How do I use WPP when building in Visual Studio? Type /Fastdetect here and press Enter. Take out the Windows XP CD, type exit and then press Enter to restart your PC.

In the section "Startup and Recovery" click the button "Settings". The friendly name is surrounded by quotation marks and represents the boot entry in the boot menu. Boot.ini can also include entries giving boot options such as Safe Mode or the Recovery Console. The boot entry specifies an operating system or bootable program and the location of its files.

In the above example, we are using an rdisk of "1", which indicates the second disk on the primary controller is being used. The box shown below will open. Click the boot.ini tab.

  1. Do I need to call WPP_CHECK_FOR_NULL_STRING?
  2. It can also include parameters that configure the operating system or program.The following sample shows the [operating systems] section of a Boot.ini file on a computer with two operating systems, Microsoft
  3. There have been some reports that these older systems can be slowed down if DEP is enabled.
  4. Option Description multi(x) This option is used with IDE and ESDI drives and is also used with SCSI drives for computers using Windows NT.
  5. Was this page useful?
  6. Boot parameters resemble command-line parameters, each beginning with a forward slash (/), such as /debug.

multi(0)— порядковый номер адаптера, с которого осуществляется загрузка. What happens to NULL strings in tracing code? For example, a damaged boot.ini file can be scanned or deleted and a new version built. Windows XP SP3 v. 5.1 . 2600.: igor : (2012-12-19) : : (2012-11-05) boot.ini , ,

For example, "/maxmem=32" instructs the operating system to use a maximum of 32MB. /noguiboot Microsoft Windows 2000 and above switch that, if enabled, will not load the graphics driver to display In the above example, the boot menu would display "Microsoft Windows XP Home Edition" as a selection. Press ENTER to choose. Here's How to Fix It Article Here's How To Copy a File in Windows XP List Unleash the Full Potential of Windows XP with These CMD Commands Article What's an INI

The second section of a boot.ini file is [operating systems]. This file is always located on the root directory of the primary hard drive. What are PRE / POST macros? That means that it will not appear in the file lists in My Computer or Windows Explorer unless the default Windows settings are changed to show hidden files.

Switch Description /basevideo Causes the operating system to use a standard VGA display when booting into the operating system. /bootlog Creates a log file named ntbtlog.txt of the computer booting. /burnmemory Boot.ini contains the location of the Windows XP operating system on the computer. Try clicking the "Check All Boot Paths" button in the boot.ini to fix this issue without having to manually edit the boot.ini as instructed below. Here's How to Do It Up Next List How to Enter Windows XP's Recovery Console Up Next List How to Repair the Most Serious Windows XP Problems Up Next Article How

There are also a number of advanced options that experienced computer users may look at. Here's How to Fix It Article How To Restore Hal.dll From the Windows XP CD Article Trying to Rebuild Windows Boot Configuration Data (BCD)? For troubleshooting and advanced startup options for Windows, press F8. The next section, or the "operating system" section, is used to list and specify the location of each of the operating systems installed on the computer.

An example of the boot menu for a dual-boot system with the added option of Safe Mode in Windows XP is shown below. What is the TMC file? How do I include the source line number in the trace message prefix? Extensive information on the new boot process can be found at this Microsoft site.

Complete the challenge below to be granted temporary access to this website. If multi(x) is used, this value will always be 0. Request ID 1484159796.86847116

Follow Us http://go.microsoft.com/fwlink/p/?LinkId=317806 http://go.microsoft.com/fwlink/p/?LinkID=690709 http://go.microsoft.com/fwlink/p/?LinkID=317805 Downloads and tools Visual Studio Windows SDK Windows Driver Kit Windows Hardware Lab Kit Windows Assessment and Deployment Kit Essentials Dashboard services Debugging tools Driver samples

This is easily accomplished by using the System Configuration Utility (often called msconfig). Structure and Contents of Boot.ini Files Some examples of boot.ini files are given in the table below. For example:multi(0)disk(0)rdisk(0)partition(1)\WINDOWS A friendly name for the boot entry. disk(0) , SCSI (LUN) . . , boot.ini .

Additional information How to or can't boot from a CD or DVD. In the middle right is a box where the settings for Timeout can be changed. In a computer using only SCSI this option will work with the first two drives on the primary SCSI controller. Continue Reading Up Next Up Next Article Trying to Rebuild Windows Boot Configuration Data (BCD)?

redirectbaudrate=— скорость порта.. Секция [operating systems][править | править вики-текст] Информация об установленных ОС и откуда и как их загружать. ОС, установленные на разделах с поддерживаемыми Microsoft Windows NT файловыми системами[править | There are a number of different switches and these are illustrated in the output to a command window shown below. Below is a listing of the common steps you are likely going to encounter. * Prompt for the identified versions of Windows installed. multi(0) - IDE SCSI, BIOS SCSI . scsi(0) SCSI, BIOS SCSI .

How do you define custom data types? Note that if you are dual-booting with Windows Vista or 7, the boot process is different from that described here and boot.ini is not present. Windows Vista/7 comes with a command-line tool bcdedit.com for configuring BCD. The default system is determined by the next line "default={address of operating system} For most home PCs the entry is "default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS".

The "default" line is the default operating system that the boot.ini will load. Because it is an essential system file, the attributes are set to hidden, system, read-only to protect it. System and Language Support for Software Tracing How do I implement software tracing for Windows XP and later versions of Windows? What are the TraceWPP parameters?

Below is a listing of each of the options. These other functions are discussed in the Microsoft references given at the end of the article. A discussion of using the tool to repair a damaged setup is discussed here. From Windows, open an MS-DOS prompt by clicking "Start" and then "Run" and typing "cmd" in the text box.

Where do I put the #include statement for the trace message header file? In newer versions of Windows, like Windows Vista, Windows 7, Windows 8, and Windows 10, boot configuration data is stored in the BCD data file, not in a boot.ini file.If you Function and Purpose of Boot.ini Boot.ini is one of the very first files that come into play when a Windows XP system is started up. How to view the boot.ini Examples of the boot menu Basic example of the boot.ini file How to modify the boot.ini Available boot.ini switches How to rebuild the boot.ini How to

Both the Timeout setting and the default operating system can be changed here. How to modify the boot.ini The boot.ini file is a hidden system file located in the root directory of your primary hard drive. Thank you for signing up. Your feedback about this content is important.Let us know what you think.