Home > Dual Boot > Partition / Disk For Dual XP/ 7

Partition / Disk For Dual XP/ 7

Contents

January 8, 2010 Roi @Energokinetic Yeah if you are sure you do not need anything off your Vista partition, you can just right click it and delete it. So, I no longer can access my Win7 because I can't boot into it. Can this same process be used for a laptop? Basically the repairs make XP not come up, but causes win 7 to come up with errors. have a peek here

The interesting thing is that it didn't touch the Win7 boot loader even if I had not detached the drive during the XP installation.Regards,Erling Ask a new question Read More Hard I even bcdedited to 10 secs before Win loads to default 7, and renamed "Earlier version" to "Win XP". January 17, 2010 John P Alan, I have read this is an issue if XP is installed after Win7. Anyhow, I hope the above links, if they work, are of help, I'll try and post any more info I find and how the New/Old build is going. http://www.howtogeek.com/howto/8790/dual-boot-your-pre-installed-windows-7-computer-with-xp/

Dual Boot Windows Xp And Windows 7

May 21, 2010 jim About six months ago I followed the instructions for dual booting with Vista and XP and all went well. Plus they are extremely easy to install, backup and recover if things happen.

April 18, 2015 Daniel Yang I agree. Obviously the description can be anything but you have to include the quotation marks. Current Discussions Conversion of NSF files to PST SQL Database Repair Windows 7 updating but it is set not to?

For all those HP users, there is a user forum on this issue at the HP website, but it is not HP moderated? The XP drive died.My question was "HOW" do a create a dual boot even if I have XP installed first?I have all my user files stored on the Win7 Hard drive Technical information: *** STOP: 0×0000007B (0xF78D2524, 0xC0000034, 0×00000000, 0×00000000) Same thing… over and OVER again. Dual Boot Windows 7 And Xp Easybcd If you correctly configured easybcd then the following should show… First, you’ll need to right click on Computer and select Properties: Next, click Advanced System Settings Now click on the Settings

I swear I can, most important you can! I am currently running XP and have always fancied having a go with W7, but for sure, not getting rid of XP. If this screen appears again, follow these steps: Check for viruses on your computer. After the process completes you’ll see the new Unallocated space.

XP sees it, assigns a drive letter ( c:) and throws the required boot files for XP on that stupid little 10MB partition. How To Install Windows Xp Over Windows 7 Some even argued that Vista was "half-baked." Whether these perceptions were accurate or not, they scared a lot of people and businesses away from using Vista.If you are one of these I partitioned C: into C/D. If you had changed the bios to AHCI or RAID, then the XP install would have failed without using the F6 additional drivers step.

Dual Boot Windows 7 And Xp Separate Hard Drives

I take it you do not know about the ALIGNMENT THAT IS NEEDED TO RUN THEM, AND THAT SINCE XP'S FLOORED FORMATTING AT SECTION 63 ETC. why not find out more Type in BCDEDIT and press Enter. Dual Boot Windows Xp And Windows 7 Windows 7 is pretty good. How To Dual Boot Windows Xp And Windows 7 (xp Installed First) FIX YOUR INSTRUCTIONS or pull them down. ------------------ Create Boot Loader Once installation of XP is successful you can now go through and install the latest Microsoft Updates and drivers.

I would appreciate any help from you guys. navigate here Besides, he can't hold every idiots hand through this process. Thanks, Paul August 11, 2010 Sam E Pablo Picaso !!! Please Let me know Should i Install a x64 version of XP? Windows Xp Dual Boot Windows 10

  • Is this a function of the XP cd or is it a thing with the laptop.
  • Unfortunately, you are wasting your time here.
  • I shrunk one of the partitions then from Windows XP installer CD I installed on the unallocated 50GB disk space (I didn't created the New Volume E: as suggested on this
  • Thanks for any help…..
  • The problem is that Win 7 creates a "System Reserved" partition of 10 MB.
  • I used BCD to name the boots Win XP Media Center, Vista Home Premium and WIN 7 Pro 64.Good luck.Greg myf1970Jun 9, 2011, 7:20 PM japentz said: Hello, This really should
  • The main difference between the two entries is the drive which they are loaded from.
  • Use the partition manager to shrink the partition with Windows Vista/7 to make enough room at the end of the drive for Windows XP.
  • June 30, 2011 Don This did not work for me on my windows 7 home premium 64 bit.
  • I use a pirate windows for long long years, nothing bad has happened 'til now… a thousand people do that!

October 28, 2010 Monkey21st """""Don I think some Notebook are dedicated to Windows 7 nowadays. December 27, 2010 Parus check the link ziaulhak.blogspot.com December 28, 2010 jolin Actually, recently I've found another way to speed up my poor PC, the software "tuneup360". But, I can't find my local network… Internet works fine, otherwise I was not writing it! http://docsintime.com/dual-boot/delete-win-10-partition-in-dual-boot-with-win-7.html After getting the bootloader back you should see both XP and Windows 7 as options in the Windows Boot Manager.

January 8, 2010 Roi @Energokinetic Yeah if you are sure you do not need anything off your Vista partition, you can just right click it and delete it. Dual Boot Windows 7 And Xp Usb Drive It will work. Conclusion If you want to set a default OS on your dual boot system, check out The Geek’s tutorial on how to set it up.

It came preloaded with Win7 Home Premium 64 Bit, which will not several of the older 32 bit programs I use for image editing and web design at work.

I take it you do not like an outsider telling you how to Multi-Boot XP and Win 7. I'm using Windows 7 Ultimate, but I still need of the Widnows XP in the same machine / hard disc. but when I go to install XP no partitions appears at the blue screen where your to select a partition. Dual Boot Windows 7 And Xp Same Partition The two drives will be visible from both OSes, so you can have data shared between the two.

Under "Entry-B ased Settings" you get the option to modify the "Earlier version of Windows" entry but in the "Drive" drop-down menu you only have the option of C: or Boot. Any ideas? If not, please clarify. this contact form let's makeExplore PublishClassesshare what you makeFeatured:Intel IoTArduinoYarnWith Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.How it Works »New Instructable »Dual

December 24, 2010 RonB I tried to dual boot XP on a p6610f PC. January 8, 2010 MariJewel Great! and does the xp version have to be a 64bit as well? January 8, 2010 anand singh Ok, its nice and well good.

June 9, 2010 Mehul i installed win xp on pre installed win7 after that i installed as per the instructions easybcd 2.0 beta built 99 when i run it then i Pick a partition on Drive II. You will undoubtedly notice that the machine is booting directly into XP at this time. I wrote a request here http://www.techsupportforum.com/hardware-support/driver-support/517300-dual-boot-xp-pro-windows-7-home-premium.html a couple of days ago.

please advise. The XP drive died.My question was "HOW" do a create a dual boot even if I have XP installed first?I have all my user files stored on the Win7 Hard drive